If you read much about startup culture or business management, you’ve no doubt come across the terms “Lean,” “Six Sigma,” and maybe even “Design Thinking.” These are concepts integral to operations management and concerned with reducing both the amount of variability and the amount of error or waste that takes place within a given process or set of procedures.

I recently had the opportunity to participate in a research project that applied these methodologies to operating room utilization in a local hospital. As the project progressed, I reflected on how a similar approach could benefit any manager or contributor looking to optimize his or her personal efficiency or the efficiency of a team, department, or agency.

Specifically, this post will cover two core elements of lean six sigma and how they can be applied by PPC managers and other digital marketers or directors.

Process (“Value-Stream”) Mapping

The first step is obviously choosing a starting point. You must consider every process that is completed on a regular basis and determine which would be most valuable to optimize. Starting with processes that take the most time will make sense only if those processes contribute real value and/or if completing them more quickly will permit other value-adding tasks to be completed in the time created through efficiency.

Once you have your first focus project selected, you will begin by creating a process map. This can be a visual (e.g. on a whiteboard, sticky notes, PowerPoint or Excel) or a written list, but the key here is to capture every single action or decision that is made between the initiation and completion of the process.

Photo by Alvaro Reyes on Unsplash

Let’s take, for example, the process of creating new expanded text ads in Google Ads.

Step 1: Decision

There are four primary means through which I can create my ads:

  1. Create each ad directly in the Google Ads interface, within the campaign and ad group of my choosing
  2. Create each ad in the Google Ads Editor and post the changes to Google Ads
  3. Draft the ads in a spreadsheet and copy/paste to Google Ads Editor
  4. Draft the ads in a spreadsheet and bulk upload into Google Ads

Each of these will have its own subsequent series of steps, and the decision will likely be based on how many ads I plan to create.

If I am creating only a single ad, then working directly in the Google Ads interface may be the most efficient. However, ads are more frequently launched in batches, so it will often be more efficient to build the copy in a spreadsheet and upload through the Google Ads Editor.

Step 2: Detailed Process Map

Let’s say I have chosen option #3 above and will be mapping the process for creating ads via Excel and Google Ads Editor. I will need observe the process in action, either by going through the steps myself or making note as someone else completes the task. I then outline the basic steps that go into this process as:

Preparation

  • Create new excel sheet and save with clear file name and date
  • Label columns in row 1: Account (if multiple), Campaign, Ad Group, Labels, Headline 1, Headline 2, Headline 3, Description 1, Description Line 2, Path 1, Path 2, Final URL, Mobile Final URL (if any), and Tracking template (if any)
  • Type or download and copy/paste desired Campaign and Ad Group names into the appropriate columns

Copy Creation

  • Type Headline 1 and verify length using the =len() function
  • Type Headline 2 and verify length using the =len() function
  • Type Headline 3 and verify length using the =len() function
  • Type Description Line 1 and verify length using the =len() function
  • Type Description Line 2 and verify length using the =len() function
  • Type Path 1 and verify length using the =len() function
  • Type Path 2 and verify length using the =len() function
  • Type or copy Final URL and verify correct page loads
  • Type or copy Mobile Final URL and verify correct page loads
  • Type or copy tracking template and proof for errors or extra spaces
  • Type labels with identifier and date to distinguish ad variations

Quality Assurance

  • Check spelling on all ad copy
  • Proof for appropriate capitalization
  • Save excel file
  • Send to client for approval (if needed)
  • If not approved, make changes based on client feedback
  • Check spelling and proof for capitalization
  • Resend to client for approval

Upload

  • After approval, reopen excel file and review that no data has been lost
  • Open Google Ads Editor
  • Open desired ad account(s)
  • Download recent changes
  • Navigate to Expanded Text Ads window
  • Select “Make multiple changes”
  • Copy/paste data from excel into Google Ads Editor
  • Verify column names mapped correctly
  • Process and review changes
  • Resolve errors (if any)
  • Select “Check changes”
  • Resolve errors (if any)
  • Select “Post”

Step 3: Make Value-Based Decisions

Once the steps of the process are mapped, I can look at the elements of each segment to determine which actions are truly adding value and which are not. The goal is to minimize the amount of time spent on non-value-adding elements.

For example, I may look at my ad creation process and notice that team members are consistently spending non-value-adding time on the Preparation phase, which is repeated with every new set of ads created. I recognize that by reducing the amount of time spent on Preparation, I can improve the efficiency of the entire process without sacrificing any amount of value.

One answer might be learning how to build an ad copy proposal template in excel, which can then be opened and renamed (“Save As”) by each team member at the start of the ad creation process. Suddenly, the Preparation phase is reduced to a single step and those few minutes saved can be channeled toward another productive task.

Bottleneck (“DMAIC”) Analysis

Sometimes efficiency opportunities will be less clear than in the above example and require a bit more work to uncover. If you are an established group that already utilizes a curated toolbox of templates, automation (i.e. scripts, google alerts, bid rules, etc.), and have mastered the art of using excel for PPC, then a bottleneck analysis (or, the DMAIC approach) may be a better fit for you.

DMAIC 5-Step Process Graphic
Photo credit: goLeanSixSigma.com

Step 1: Define

You will again start by mapping or defining the steps that take place within your selected process. For the sake of this process, you will want to group actions that take place simultaneously or would be classified as a single “step” in the process. However, understanding the distinct actions within each step will be necessary as we get deeper into the analysis.

The end goal of this action is a process map such as the one outlined above.

Step 2: Measure

Once you have your process map outlined, you will begin to collect real data on the execution of the procedure. In most cases, this will relate to the amount of time spent on each step of the process. However, you should also document the number of errors or revisions required, as those will equate to waste that could and should be eliminated.

The end goal of this action is a process map with an objective data set related to each step.

Step 3: Analyze

With data in hand, you can now determine objectively which step(s) could be optimized in order to reduce waste or variation. Your data should reveal if there are any steps frequently being repeated (such as “(re)send to client for approval” or “resolve errors (if any)” in the example above), or steps with significant variation in the time required to complete. Any steps that serve as a bottleneck, due to either variation or waste, are prime for optimization or elimination.

The end goal of this action is to identify one or more bottlenecks, and the contributing factors to that bottleneck, which can be improved for efficiency.

Step 4: Improve

As you might expect, once you have identified the bottleneck issue, you must take action to resolve it. To demonstrate, let’s say that I am looking to improve the process for updating Facebook ad creative on behalf of a small enterprise client. After mapping the steps in the process, I find two activities to be the largest bottlenecks inhibiting my process flow: obtaining creative from the client and customizing assets for non-feed placements.

To address the first bottleneck, I calculate the amount of time, on average, it takes to get new imagery from the client after making a request. I then determine how many creative refreshes would ideally take place during that same amount of time. This tells me how many sets of creative I need to request in order to receive the imagery at approximately the time I will need it. My improvement decision is to ask for 30% more imagery than needed during each request, which provides cushion against potential bottlenecking in the future.

For the second bottleneck, I make note that asset customization in Facebook must be completed for a single ad, so bulk editing is not an option to improve efficiency. However, I also note that many aspects of the customized creative are the same regardless of the ad set in which it is placed. I determine that instead of creating ads in bulk and then customizing them individually, I will create and customize a single ad, then duplicate across ad sets where the customized creative matches. This allows me to then bulk edit the standard elements (i.e. headline, landing page URL, tracking parameters, etc.) without needing to complete the asset customization step for each individual ad creative.

The end goal of this action is to have a clear action plan that will eliminate waste or variation in your observed bottlenecks.

Step 5: Control

The final step is to ensure that the improvements implemented have the desired effect and do, in fact, improve efficiency within your processes. If you note that the improvement plans are causing additional delay, waste, or variation, you will need to return to step 1, 2, or 3 for a better understanding of the bottleneck contributors.

If you have completed all steps effectively, however, you should find that your processes go more smoothly and more quickly over time as the DMAIC benefits are reaped.

Closing Thoughts

This has been a very brief and high-level overview of lean six sigma practices within the narrow scope of PPC marketing. There is a wealth of additional information available across the web, and I encourage you to dive deeper if the ideas here are of interest to you.

I am eager to see more of these principles in action, so if you are a digital marketer who leverages lean six sigma in your own team management or practices, please reach out to me on Twitter or LinkedIn to share your perspective!